 May 9, 2013 – Ram Air Gear Dryer has introduced a rinse station and staging accessory specifically for gear that cannot be washed in a mechanical washer.
The rinse station and staging accessory holds stickmen from the gear dryer in an upright position so that the gear can be easily rinsed and decontaminated. Fire departments and special-ops teams can also stage wet gear when their gear exceeds the capacity of the dryer. In particular, the accessory aids in the proper decontamination of hazmat, immersion and dive suits. The stickmen can also be transferred directly to the drying station, eliminating the need to handle wet gear.
When not in use, the rinse station and staging accessory folds easily for storage.
For more information, visit www.ramairgeardryer.com.
|
|
 April 24, 2013 – Elkhart Brass has released its Cobra EXM water monitor. The water monitor, or water cannon, offers up to 1,500 gpm with less friction loss.
The symmetrical monitor is designed to be compact. Its rugged components, such as the thrust rods and bearings, deliver ten times the durability of traditional monitors. It also offers fully programmable travel speeds, easy-to-use two-way fibre optic controls that allow both wired or wireless operation, and simple plug-and-play electronic components, all of which can be power with 12 or 24 volts.
For more information on the Cobra, including base options, discharge threads and upgrades, visit www.elkhartbrass.com.
|
|
 April 12, 2013 – Tablet Command, a new iPad application, is now available for purchase in Canada.
The app, which was developed by two California-based firefighters, allows incident commanders to digitally track and map firefighters on the fire ground. The app also takes time stamps of each maneuver and benchmark throughout the incident, making incident reporting easier.
Tablet Command also comes with three pre-set checklists for structure fires, vehicle accidents and hazmat incidents, and also lets users create their own custom checklists.
For more information, visit TabletCommand.com
|
|
 March 11, 2013 – Kussmaul Electronics has released TIMER-X, its new universal timer, which can be operated in any of three modes: delay-on pull-in mode (DOPI), delay-on drop-out mode (DODO) or cycle-timer relay mode.
The timer – which can easily be set in the field – uses a simple switch system for precise settings that range from one second to 99 hours. A 30 Amp relay switch can function on both AC or DC loads, while the timer's output relay provides both normally open and normally closed contacts. A red LED light indicates when the relay is energized. The device also comes with a three-year warranty.
For more information, visit www.kussmaul.com
|
|
 Feb. 21, 2013 – Lentry Light Systems, by Ventry Solutions, has made its all-terrain generator lights available with LEDs.
The LEDs offer 20,000 lumens of both spot and floor light at once. The device offers 120 volts at just two amp and 240 watts, and can power up to five telescoping LEDs at once. The light tower height ranges from 4.5 feet to 13 feet, fully extended. The unit has a rugged design and features heat-resistant handles and the lights, which instantly turn on at full intensity, are rated for 50,000 hours (or 5.7 years) of continuous use.
For more information, visit www.ventry.com.
|
|
|
| Results 1 - 5 of 277 |
